Reedify Modulars
TV Unit

TV Panel Design: 10 Wall Panel Ideas for Halls and Bedrooms, With Sizes

Ten TV panel designs for halls and bedrooms, with panel sizes for 32 to 85 inch TVs, finishes compared, concealed wiring and lighting, and what decides cost.

Rahul Jangra - Reviewed by Vani Jain - 18 Nov 2026 - Updated 18 Nov 2026 - 7 min read - 0 views

TV Panel Design

A TV panel is a decorative wall panel fixed behind the television, usually with concealed wiring and often with a console, shelves or lighting built in. It turns a bare wall and a hanging TV into one finished feature. For a 55-inch TV, a panel about 6 to 7 ft wide and running at least 2 ft above and below the screen looks balanced; in a hall, a full-height panel to the ceiling usually looks best.

In India the same thing is searched as "LED panel design" or "LCD panel design", names that date from when flat screens replaced box TVs. This guide covers panel sizes, ten designs that work in Indian halls and bedrooms, finishes, wiring and lighting, and what decides the cost of a made-to-measure TV panel.

TV panel size for your screen and wall

The panel should be wider than the TV and extend above and below it, so the screen sits inside a frame rather than at its edge.

TV size

Approx. screen width

Panel width (minimum)

Panel width (generous)

32-inch

About 28 in

3.5 ft

4–4.5 ft

43-inch

About 38 in

4.5 ft

5.5–6 ft

55-inch

About 48 in

5.5 ft

6.5–7 ft

65-inch

About 57 in

6.5 ft

7.5–8 ft

75–85-inch

65–74 in

7.5 ft

Full wall

Height. A panel that stops just above the TV looks unfinished. Either take it at least 2 ft above the top of the screen, or take it to the ceiling. Full-height panels make a room look taller.

Screen position. Keep the centre of the screen about 40 to 45 inches from the floor in a living room, so the panel is designed around a comfortable viewing height rather than the other way round.

10 TV panel designs that work in Indian homes

1. Plain laminate panel

One solid colour in matte laminate, with the TV and a floating shelf. The simplest and most budget-friendly TV panel, and easy to refresh later.

2. Wood-grain panel

A warm wood-grain laminate behind the TV, paired with a plain wall on either side. It suits most Indian living rooms and hides dust and marks.

3. Fluted panel

Vertical grooves or ribs that catch light and add texture. Fluted panels are one of the most requested TV wall styles, and work best in a muted colour so the texture does the work.

4. Backlit panel

A strip of warm light behind the panel edges or the TV gives a soft glow in the evening and reduces eye strain in a dark room.

5. Panel with floating console

A panel to the ceiling with a wall-mounted console below it, about 6 to 12 inches off the floor. Clean, modern and easy to clean under.

6. Full-wall panel with storage towers

A wide panel in the middle with tall closed cabinets on both sides. It suits large halls and families who need storage in the living room.

7. Panel with display niches

Open niches, sometimes lit, for photos, plants and decor. Keep the niches to one side or in a regular grid so the wall doesn't look busy.

8. Panel with a separate pooja niche

A small mandir set into the same wall but clearly separated from the TV, with its own lighting and a closed shutter. See Reedify's pooja unit designs for how the niche is kept apart.

9. Two-tone panel

Two finishes, for example a dark panel directly behind the TV and a lighter one around it. The dark section reduces reflections on the screen.

10. Simple panel for a rented home or budget

A slim panel only as wide as the TV plus a foot on each side, with one shelf. It gives a finished look at the lowest cost.

TV panel finishes compared

Finish

Look

Practical notes

Matte laminate

Calm, solid colour

Hides fingerprints; best value

Wood-grain laminate

Warm, natural

Hides dust and wear; suits most homes

Fluted laminate or panels

Textured, premium

Needs dusting in the grooves

Acrylic

High gloss, reflective

Avoid directly behind the screen; reflections

PU paint / painted gloss

Smooth, any colour

Good for statement walls; touch-ups are harder at home

Glass

Reflective, modern

Use only as small accents, away from the screen

Reedify makes TV panels in laminate (matte, gloss and wood-grain), fluted panels, acrylic, PU paint, painted gloss and glass, on plywood or HDHMR. Reedify does not offer veneer.

Wiring and lighting inside the panel

A good TV panel hides every cable. Plan these before the panel is made:

  1. A conduit inside the panel from the TV bracket down to the console, for power and HDMI

  2. Sockets behind the TV and inside the console, so no plug shows

  3. A vented section for the set-top box and router

  4. Soundbar position, either on the console or on its own bracket below the TV

  5. Lighting circuits, so panel lights switch separately from room lights

On every Reedify TV unit, cable routing for power, set-top box, soundbar and gaming consoles is planned in the 3D design before any panel is cut.

TV panel design for the hall vs the bedroom

Factor

Hall / living room

Bedroom

Panel size

Wide, often full height or full wall

Slimmer, often only behind the TV

Finish

Fluted, wood-grain, two-tone, backlit

Matte or wood-grain, no gloss facing the window

Storage

Console, towers, display niches

Slim shelf, a few drawers

Lighting

Feature lighting for evenings

Soft, warm light only

For more living-room layouts, see the living room TV unit guide.

Common TV panel mistakes

  • Panel too narrow. A panel only as wide as the screen makes the TV look stuck on the wall.

  • Glossy finish behind the screen. It reflects windows and lights into the picture.

  • Wiring after installation. Surface cables undo the whole look. Plan the conduit first.

  • Too many niches. A wall full of small niches looks cluttered and collects dust.

  • Ignoring the soundbar. It needs its own space below the screen.

What a TV panel costs

The cost of a TV panel depends on its area, the finish, fluting or other texture, the lighting, and how much storage is built into the same wall. Because these vary so much, Reedify quotes panels on the final design. The console part of a TV unit starts at around ₹1,000 per sq ft of front area, plus GST; a 6 ft console 1.5 ft high starts at about ₹9,000 before GST.

You get a fixed, itemised quote after the free site measurement and 3D design. See finished TV walls in Reedify's portfolio.

Get your TV panel designed in 3D

Send these to Reedify on a call or WhatsApp at +91 98120 53001:

  1. A photo of the TV wall, taken from where you sit

  2. The wall width and ceiling height

  3. Your TV size, and whether you plan to upgrade soon

  4. Any pooja niche, storage or display you want on the same wall

  5. Two or three reference photos of panels you like

Reedify measures the wall, checks the sockets and switches, prepares a 3D design with the wiring route planned, and gives a fixed quote. Nothing is cut until you approve the design. The Reedify working model explains each step from measurement to installation.

Frequently Asked Questions

Frequently Asked Questions

  • A decorative wall panel behind the TV, usually with concealed wiring and often with a console, shelves or lighting built in. It is also called an LED panel or LCD panel design.

  • At least 5.5 ft wide, and 6.5 to 7 ft for a more generous look, extending at least 2 ft above the screen or up to the ceiling.

  • Matte or wood-grain laminate directly behind the screen, because it doesn't reflect light. Use fluted, acrylic or painted finishes around it for texture or colour.

  • Yes. A conduit inside the panel carries power and HDMI from the TV bracket to the console, with sockets hidden behind the TV and inside the console.

  • Yes, if it is clearly separated from the TV, with its own lighting and ideally a closed shutter.

  • It depends on the panel area, finish, texture and lighting, so Reedify quotes panels on the final design. The console part starts at around ₹1,000 per sq ft of front area, plus GST.

  • Term

    What it usually means

    TV panel / TV wall panel

    The decorative back panel on the wall behind the TV

    LED panel / LCD panel design

    The same thing, named after the type of TV

    TV console

    The low cabinet below the TV for devices and storage

    TV unit

    The complete setup: panel, console, shelves and storage together

    Most people asking for a "TV panel design" want the complete look, a panel with a console below and some display space. Reedify designs all of these as one custom TV unit, so the panel, shelves and console share one finish and one wiring plan.

R

Written by

Rahul Jangra

Marketing

Expertise in SEO And Content Writing

Reviewed for accuracy by

Vani Jain

Digtial Marketing Executive

Related posts

New guides on kitchens, wardrobes and interiors.

One email a month from the Reedify Modulars team. Unsubscribe anytime.